精细注水配套工艺技术优化研究

本文通过对注水配套工艺的优化研究,有效提高奈曼油田分注率和配注合格率,提高精细注水开发效果。     

The effects of preparation and cooking processes on vitamins and antioxidant capacity of sour and spicy potato silk

The effect of a traditional dish sour and spicy potato silk preparation and cooking process on B vitamins, phenolic profiles and antioxidant activities was investigated. Results showed that cutting of potato caused an increase in VB₁, VB₂, nicotinic acid, nicotinamide, VB₇ and VB₉. Soaking decreased the content of B vitamins and vitamin C. Blanching and rinsing caused the contents of B vitamins and vitamin C decrease compared to the control. The content of VB₁, VB₅ and VB₆ after rinsing increased compared to soaking and blanching processes. However, VB₁, nicotinamide, VB₅, VB₆ and VC decreased sharply after the stir-frying process. The content of VB₁, nicotinic acid, nicotinamide, VB₇ and VC retained the most after five steps compared to the control. In addition, there was no difference in VB₉ contents among different cooking processes compared to the control. Superoxide dismutase (SOD) exhibited a reduction rate of 95.32% and peroxidase (POD) 97.13% after the stir-frying process.     

Incomplete analytic hierarchy process with minimum weighted ordinal violations

ABSTRACT

Incomplete pairwise comparison matrices offer a natural way of expressing preferences in decision-making processes. Although ordinal information is crucial, there is a bias in the literature: cardinal models dominate. Ordinal models usually yield nonunique solutions; therefore, an approach blending ordinal and cardinal information is needed. In this work, we consider two cascading problems: first, we compute ordinal preferences, maximizing an index that combines ordinal and cardinal information; then, we obtain a cardinal ranking by enforcing ordinal constraints. Notably, we provide a sufficient condition (that is likely to be satisfied in practical cases) for the first problem to admit a unique solution and we develop a provably polynomial-time algorithm to compute it. The effectiveness of the proposed method is analyzed and compared with respect to other approaches and criteria at the state of the art.     

基于RGV轨导柔性线环境离散型零件生产过程管理与实践

为满足航空中小型结构件快速交付的需要,以提升航空中小型结构件制造高精度、自动化和高效率为目标,通过对航空中小型结构件加工现状进行梳理分析,搭建柔性生产线自动排程与调度平台,实现柔性生产线工艺设计与准备过程管理,简化工艺准备流程,推进快换工装的应用并进行自动化程序管理;在柔性生产线加工运行过程中采用可视化管理方法,推动自动化环境下加工过程资源保障集中化管理。最终使该管理方法在某项目中进行成功实践,取得了良好的经济效益。     

不同煤层掘进工作面瞬变电磁法探测应用研究

煤矿井下瞬变电磁法成为煤矿井下超前探测工作的重要手段，在矿井水害预测预报上发挥着很大的作用。随着矿井上组煤层资源的逐渐枯竭，煤矿开采资源逐渐延伸向下组煤层。同一井田范围内同煤层及其顶底板的岩性特征一般相差不大，瞬变电磁法在同煤层施工过程中接收到的物理背景场较为接近；而不同煤层及其顶底板岩性特征通常会有较大的差别，瞬变电磁法在不同煤层施工过程中会接收到差别较大的物理背景场。当矿井存在多煤层开采时，通过大量数据研究瞬变电磁法在不同煤层巷道探测中的响应特征规律，分析并掌握不同煤层条件对瞬变电磁法探测结果的影响，能够提高瞬变电磁法在多煤层探测成果的准确性。     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。     

装填设备载荷影响因素分析及动力学仿真

大型货物的装填过程中影响载荷的因素较多,其中对中精度对装填载荷影响较为明显。通过动力学仿真软件ADAMS对装填过程中载荷进行模拟,并对各影响因素进行定量分析,得到对中偏差与装填载荷的关系。将仿真结果与试验数据进行对比,验证该仿真方法的正确性,可作为后续研究装填载荷的一种方法,为结构设计提供指导。     

Effect of neodymium substitution on crystalline orientation,microstructure and electric properties of sol-gel derived PZT thin films

Pb(Nd_xZr_0.52Ti_0.48)O₃ (PNZT) (x = 0%, 1%, 2%, 3%, 4%, 5%) thin films were prepared by sol-gel process to investigate the effects of neodymium substitution on crystalline orientation, microstructure and electric properties of lead zirconate titanate (PZT) films. X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis showed that PNZT films with Nd doping concentration below 3% exhibited dense perovskite structure with (100) preferred orientation. The average grain size of PNZT films decreased as the Nd substitution increased. The maximum dielectric constant, remnant polarization and minimum coercive field were obtained in 2% Nd-doped PZT films. Fatigue resistance was also improved significantly with 2% Nd dopant.     

A comparative study on the effect of loading speed and surface scratches on the flexural strength of aluminosilicate glass: Annealed vs. chemically strengthened

Quasi-static and dynamic three-point-bending experiments were conducted on both annealed and chemically strengthened aluminosilicate glass scratched by different normal loads. Scratched areas were observed by optical microscope and atomic force microscope. Chemically strengthened glass shows better resistance to surface scratch. These dynamic experiments were carried out using a modified Split Hopkinson Pressure Bar (SHPB) device and a pulse-shaping technique was used to keep constant loading speed to the specimens. In tests, high-speed photography was also used to observe the failure process of the specimens. The test results showed that the flexural strength of aluminosilicate glass (AG) strongly depends on the applied loading speed. Compared with its annealed counterpart, the chemically strengthened glass (CSG) showed higher flexural strength to both static and dynamic loadings. Moreover, the three-point bending experiments were conducted on scratched AG and CSG specimens and decrease of 20–40% in flexural strength was observed. The fractography analysis showed that in dynamic loading conditions the fracture surface was not smooth and has more secondary cracks as compared to static loading.